Cisco ASR 901 User Manual

CHAPTER
1-1
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
1
CLI Command Reference
Revised: July 30, 2014, OL-26031-07
This chapter contains an alphabetical listing of commands for the Cisco ASR 901 Series Aggregation
Services Router.
Note For a general reference for Cisco IOS, see the documentation for Cisco IOS Software Releases 15.1S.
The Cisco ASR 901 does not necessarily support all of the commands listed in the 15.1S documentation.
• asr901-ecmp-hash-config global-type
• asr901-ecmp-hash-config ipv4-type
• asr901-ecmp-hash-config ipv6-type
• asr901-ecmp-hash-config mpls-to-ip
• asr901-multicast source
• asr901-platf-frr enable
• asr901-platf-multicast enable
• asr901-platf-multi-nni-cfm
• bfd all-interfaces
• bfd interval
• channel-group (interface)
• channel-protocol (interface)
• class (policy-map)
• class cem
• clear platform ptp stats
• clock-port
• clock-destination
• clock source (interface)
• controller
• cpu traffic ppp set ip dscp cs
• cpu traffic ppp set mpls experimental topmost
• debug platform tcam error

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours