Cisco ASR 901 User Manual

1-21
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
channel-protocol (interface)
channel-protocol (interface)
To enable Link Aggregation Control Protocol (LACP) on an interface to manage channeling, use the
channel-protocol command in interface configuration mode. Use the no form of this command to
deselect the protocol.
channel-protocol {lacp}
no channel-protocol
Syntax Description
Command Modes Interface configuration
Command History
Usage Guidelines This command is valid on multiple interfaces (for example, Fast Ethernet) and routers and switches.
Examples The following example shows how to set the lacp.
(config-if)# channel-protocol lacp
lacp Specifies LACP to manage channeling.
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours