Cisco Catalyst 9200 User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Step 6
Device(config)# end
Verifies your entries.show running-config
Example:
Step 7
Device# show running-config
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 8
Device# copy running-config startup-config
What to do next
To disable MAC address-move notification traps, use the no snmp-server enable traps mac-notification
move global configuration command. To disable the MAC address-move notification feature, use the no mac
address-table notification mac-move global configuration command.
You can verify your settings by entering the show mac address-table notification mac-move privileged
EXEC commands.
Configuring MAC Threshold Notification Traps
When you configure MAC threshold notification, an SNMP notification is generated and sent to the network
management system when a MAC address table threshold limit is reached or exceeded.
Follow these steps to configure the switch to send MAC address table threshold notification traps to an NMS
host:
SUMMARY STEPS
1. enable
2. configure terminal
3. snmp-server host host-addr {traps | informs} {version {1 | 2c | 3}} community-string notification-type
4. snmp-server enable traps mac-notification threshold
5. mac address-table notification threshold
6. mac address-table notification threshold [limit percentage] | [interval time]
7. end
8. show running-config
9. copy running-config startup-config
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
35
Administering the Device
Configuring MAC Threshold Notification Traps

Cisco Catalyst 9200 Specifications

General

Brand	Cisco
Model	Catalyst 9200
Category	Switch
Language	English