Cisco Catalyst 9200 User Manual

Configuration Examples for Device Administration
Example: Setting the System Clock
This example shows how to manually set the system clock:
Device# clock set 13:32:00 23 July 2013
Examples: Configuring Summer Time
This example (for daylight savings time) shows how to specify that summer time starts on March 10 at 02:00
and ends on November 3 at 02:00:
Device(config)# clock summer-time PDT recurring PST date
10 March 2013 2:00 3 November 2013 2:00
This example shows how to set summer time start and end dates:
Device(config)#clock summer-time PST date
20 March 2013 2:00 20 November 2013 2:00
Example: Configuring a MOTD Banner
This example shows how to configure a MOTD banner by using the pound sign (#) symbol as the beginning
and ending delimiter:
Device(config)# banner motd #
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
#
Device(config)#
This example shows the banner that appears from the previous configuration:
Unix> telnet 192.0.2.15
Trying 192.0.2.15...
Connected to 192.0.2.15.
Escape character is '^]'.
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
41
Administering the Device
Configuration Examples for Device Administration

Cisco Catalyst 9200 Specifications

General

Brand	Cisco
Model	Catalyst 9200
Category	Switch
Language	English