Cisco Catalyst 9200 User Manual

Before you begin
Use a standalone device for this task.
SUMMARY STEPS
1. configure terminal
2. boot flash:/file-url
3. end
4. show boot
5. copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Step 1
Switch# configure terminal
Specifies the configuration file to load during the next boot
cycle.
boot flash:/file-url
Example:
Step 2
file-url—The path (directory) and the configuration
filename.
Switch(config)# boot flash:config.text
Filenames and directory names are case-sensitive.
Returns to privileged EXEC mode.end
Example:
Step 3
Switch(config)# end
Verifies your entries.show boot
Step 4
Example:
The boot global configuration command changes the setting
of the CONFIG_FILE environment variable.
Switch# show boot
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 5
Switch# copy running-config startup-config
Manually Booting the Switch
By default, the switch automatically boots up; however, you can configure it to manually boot up.
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
71
Performing Device Setup Configuration
Manually Booting the Switch

Cisco Catalyst 9200 Specifications

General

Operating System	Cisco IOS XE
Model	Catalyst 9200
Ports	24 or 48
Port Types	10/100/1000BASE-T, 1G/2.5G/5G/10GBASE-T, SFP, SFP+
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
Stacking	Yes, up to 8 switches
Security Features	TrustSec
Management	Cisco DNA Center
Operating Temperature	32°F to 104°F (0°C to 40°C)