Cisco SGE2000 User Manual

145
Chapter 8: Defining Address Tables
Defining Static Addresses
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
8
2. Click the Add button. The Add Static MAC Address Page opens:
Add Static MAC Address Page
The Add Static MAC Address Page contains the following fields:
• Unit Number — Indicates the stacking member for which the Static address is defined.
• Interface — Displays the interface to which the entry refers:
– Port — The specific port number to which the forwarding database parameters refer.
– LAG — The specific LAG number to which the forwarding database parameters refer.
• MAC Address — Displays the MAC address to which the entry refers.
• VLAN ID — Displays the VLAN ID number to which the entry refers.
• VLAN Name — Displays the VLAN name to which the entry refers.
• Status — Displays how the entry was created. The possible field values are:
– Permanent — The MAC address is permanent.
– Delete on Reset — The MAC address is deleted when the device is reset.
– Delete on Timeout — The MAC address is deleted when a timeout occurs.
– Secure — The MAC Address is defined for locked ports.
3. Define the relevant fields.
4. Click Apply. The Static MAC Address is added, and the device is updated.

Cisco SGE2000 Specifications

General

Brand	Cisco
Model	SGE2000
Category	Network Router
Language	English