74
Chapter 4: Configuring Device Security
Defining 802.1x
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
Defining Authenticated Host
1. Click Security Suite > 802.1X > Authenticated Host. The 802.1X Port Authentication Page opens:
802.1X Authenticated Host Page
The 802.1X Authenticated Host Page contains the following fields:
• Unit Number — Displays the stacking member for which the Authenticated Hosts parameters are
displayed.
• User Name — Lists the supplicants that were authenticated, and are permitted on each port.
• Port — Displays the port number.
• Session time — Displays the amount of time (in seconds) the supplicant was logged on the port.
• Authentication Method — Displays the method by which the last session was authenticated. The
possible field values are:
– Remote — 802.1x authentication is not used on this port (port is forced-authorized).
– None — The supplicant was not authenticated.
– RADIUS — The supplicant was authenticated by a RADIUS server.
• MAC Address — Displays the supplicant MAC address.
2. Define the relevant fields.
3. Click Apply. The authenticated host settings are defined, and the device is updated.
To Next Page
Loading...
Need help?
General
