85
Chapter 4: Configuring Device Security
Defining DOS Prevention
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
• LAGs — Displays the LAGs bound by the ACL.
• Of Unit — Displays the stacking member for which the ACL binding parameters are displayed.
• Interface — Indicates the interface to which the ACL is bound.
• ACL Name — Indicates the ACL which is bound the interface.
Modifying ACL Binding
1. Click Security Suite > Access Control > ACL Binding. The ACL Binding Page opens:
2. Click the Edit button. The Bind ACL Page opens:
Bind ACL Page
The Bind ACL Page contains the following fields:
• Interface — Indicates the interface to which the ACL is bound.
• Select ACL — Indicates the ACL which is bound the interface.
3. Define the relevant fields.
4. Click Apply. ACL binding is defined, and the device is updated.
Defining DOS Prevention
The DOS Prevention section contains the following pages:
• Global Settings
• Defining Martian Addresses
Global Settings
1. Click Security Suite > Dos Prevention > Global Settings. The Global Settings Page opens:
To Next Page
Loading...
Need help?
General
