245
Chapter 16: Viewing Statistics
Viewing Ethernet Statistics
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
16
• Multicast Packets — Displays the number of good Multicast packets received on the interface since
the device was last refreshed.
• Broadcast Packets — Displays the number of good broadcast packets received on the interface
since the device was last refreshed.
• Packets with Errors — Displays the number of packets with errors.
The Transmit Statistics area contains the following fields:
• Total Bytes (octets) — Displays the number of octets transmitted on the interface since the device
was last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
• Unicast Packets — Displays the number of good Unicast packets transmitted on the interface since
the device was last refreshed.
• Multicast Packets — Displays the number of good Multicast packets transmitted on the interface
since the device was last refreshed.
• Broadcast Packets — Displays the number of good broadcast packets transmitted on the interface
since the device was last refreshed.
Resetting Interface Statistics Counters
1. Click Statistics > Ethernet > Interface. The Interface Page opens:
2. Click the Clear Counters button. The interface statistics counters are cleared.
Viewing Etherlike Statistics
The Etherlike Page contains interface statistics. To view Etherlike Statistics:
1. Click Statistics > Ethernet >Etherlike. The Etherlike Page opens:
To Next Page
Loading...
Need help?
General
