Cisco SGE2000 User Manual

181
Chapter 11: Configuring SNMP
Configuring SNMP Security
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
11
3. Define the relevant fields.
4. Click Apply. The SNMP views are defined, and the device is updated.
Defining SNMP Users
The SNMP Users Page provides information for creating SNMP groups, and assigning SNMP access
control privileges to SNMP groups. Groups allow network managers to assign access rights to specific
device features, or feature aspects.
1. Click System > SNMP > Security > Users. The SNMP Users Page opens:
SNMP Users Page
The SNMP Users Page contains the following fields.
• User Name — Displays the user-defined group to which access control rules are applied. The field
range is up to 30 characters.
• Group Name — Displays the user-defined group to which access control rules are applied.
• Engine ID — Indicates the local device engine ID.
• Authentication — Indicates the Authentication method used.
2. Click the Add button. The Add SNMP Group Membership Page opens:

Cisco SGE2000 Specifications

General

Brand	Cisco
Model	SGE2000
Category	Network Router
Language	English