185
Chapter 11: Configuring SNMP
Configuring SNMP Security
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
11
– Default — Defines the default group access rights.
– DefaultSuper — Defines the default group access rights for administrator.
Modifying SNMP Group Profile Settings
1. Click System > SNMP > Security > Groups. The SNMP Groups Profile Page opens:
2. Click the Edit Button. The SNMP Group Profile Settings Page opens:
SNMP Group Profile Settings Page
The SNMP Group Profile Settings Page contains the following fields:
• Group Name — Displays the user-defined group to which access control rules are applied. The field
range is up to 30 characters.
• Security Model — Defines the SNMP version attached to the group.
• Security Level — Defines the security level attached to the group. Security levels apply to SNMPv3
only.
• Operation — Defines the group access rights. The options for each operation Read, Write and
Notify are as follows:
– Default — Defines the default group access rights.
– DefaultSuper — Defines the default group access rights for administrator.
Defining SNMP Communities
The Access rights are managed by defining communities in the SNMP Communities Page. When the
community names are changed, access rights are also changed. SNMP communities are defined only for
SNMP v1 and SNMP v2c.The SNMP Communities Page contains two areas, the Basic Table and the
Advanced Table. To define SNMP Communities:
1. Click System > SNMP > Security > Communities. The SNMP Communities Page opens:
To Next Page
Loading...
Need help?
General
