Cisco SGE2000 User Manual

238
Chapter 15: Configuring System Time
Defining System Time
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
15
– Time — The time at which DST begins every year. The field format is Hour:Minute, for example,
02:10.
• To — Indicates the recurring time that DST ends each year. For example, DST ends locally every fourth Friday
in October at 5:00 am. The possible field values are:
–
Day — The day of the week at which DST ends every year. The possible field range is Sunday-
Saturday.
– Wee k — The week within the month at which DST ends every year. The possible field range is 1-5.
– Month — The month of the year in which DST ends every year. The possible field range is Jan.-Dec.
– Time — The time at which DST ends every year. The field format is Hour:Minute, for
example, 05:30.
2. Define the relevant fields.
3. Click Apply. The Time Settings are defined, and the device is updated.
Defining SNTP Settings
The SNTP Settings Page provides information for defining SNTP parameters globally. To define SNTP
global parameters:
1. Click System > System Management > Time > SNTP Settings. The SNTP Settings Page opens:
SNTP Settings Page
The SNTP Settings Page contains the following fields:

Cisco SGE2000 Specifications

General

Brand	Cisco
Model	SGE2000
Category	Network Router
Language	English