Cisco SGE2000 User Manual

202
Chapter 12: Configuring Quality of Service
Defining General Settings
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
12
– Checked — Restores the factory QoS default settings to ports.
– Unchecked— Maintains the current QoS settings.
Modifying Interface Priorities
1. Click Quality of Service > General > CoS. The CoS Page opens:
2. Click the Edit button. The Edit Interface Priority Page opens:
Edit Interface Priority Page
The Edit Interface Priority Page contains the following fields:
• Interface — Indicates the port or LAG name.
• Set Default User Priority— Defines the default CoS value for incoming packets for which a VLAN
tag is not defined. The possible field values are 0-7. The default CoS is 0.
3. Modify the Interface priority.
4. Click Apply. The Interface priority is set, and the device is updated.
Defining Queue
The Queue Page contains fields for defining the QoS queue forwarding types.
1. Click Quality of Service > General > Queues. The Queue Page opens:

Cisco SGE2000 Specifications

General

Brand	Cisco
Model	SGE2000
Category	Network Router
Language	English