Cisco UCS X9508 User Manual

Step 6 Recycle the sheet metal and motherboard in compliance with your local recycling and e-waste regulations.
What to do next
To remove the chassis motherboard, go to Recycling the Chassis PCB Assembly (PCBA), on page 101.
Recycling the Chassis PCB Assembly (PCBA)
Each Cisco UCS X9508 chassis has a PCBA (motherboard) that is connected to the chassis midplane sheet
metal. You must disconnect the PCBA from the chassis sheet metal to recycle the PCBA. Each PCBA is
attached to the midplane sheet metal by 19 M4 screws. You will need to disassemble and remove additional
parts to gain access to the PCBA.
You will need to recycle the PCBA for each UCS X9508 chassis.
Use the following procedure to recycle the Cisco UCS X9508 motherboard.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics and sheet metal for proper disposal to comply with local eco design
and e-waste regulations.
Note
Cisco UCS X9508 Server Chassis Installation Guide
101
Installing and Removing Components
Recycling the Chassis PCB Assembly (PCBA)

Cisco UCS X9508 Specifications

General

Brand	Cisco
Model	UCS X9508
Category	Server
Language	English