Cisco UCS X9508 User Manual

CHAPTER 2
Installation
This chapter contains the following sections:
• Installation Notes and Warnings for the Cisco UCS X9508 Server Chassis, on page 19
• Rail Installation Templates, on page 27
• Installing Cage Nuts, on page 29
• Rail Kits, on page 30
• Installing the Chassis, on page 32
• Removing the Chassis from a Rack, on page 55
• Repacking the Chassis, on page 55
Installation Notes and Warnings for the Cisco UCS X9508 Server
Chassis
The following notes and warnings apply to all installation tasks:
Before you install, operate, or service the system, see the Regulatory Compliance and Safety Information for
Cisco UCS for important safety information.
Note
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
Cisco UCS X9508 Server Chassis Installation Guide
19

Cisco UCS X9508 Specifications

General

Brand	Cisco
Model	UCS X9508
Category	Server
Language	English