Clevo P150e User Manual

Modules
7 - 62 Bluetooth Module
7
3rd Party Bluetooth Combo Driver Version 1 Installation
Note this driver is required for the 3rd Party combo Bluetooth and WLAN module
version 1 (Bluetooth V3.0) only.
1. Before installing the driver make sure the Bluetooth module is powered
on (use Fn + F12 key combination), then insert the Device Drivers & Utili-
ties + User’s Manual disc into the CD/DVD drive. If a Found New Hard-
ware window appears, click Cancel in all windows that appear, and then
proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 5.Install Combo BT Driver > Yes.
4. Choose the language you prefer and click OK.
5. Click Next.
6. Click the button to accept the license and click Next.
7. Click Next > (select if you want to create an icon to appear on the desktop)
Next > Install.
8. Click Finish.
9. The My Bluetooth icon will appear on the desktop and the Bluetooth
item will be installed in the Programs/All Programs menu.
10. See “3rd Party Bluetooth Networking Setup” on page 7 - 66 for informa-
tion on Bluetooth networking.

High Speed Bluetooth
Data Transfer
The Combination Wire-
less LAN & Bluetooth
module supports high
speed data transfer. How-
ever to achieve such
transfer speeds,
both de-
vices must support
high speed data trans-
fer
.
To obtain high speed
data transfer make sure
that both the WLAN and
Bluetooth modules are
powered on.
Check your Bluetooth
compatible device’s doc-
umentation to confirm it
supports high speed data
transfer.

Clevo P150e Specifications

General

Brand	Clevo
Model	P150e
Category	Laptop
Language	English