InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
Information on binary
output available (See
list of Binary outputs)
shutdown is immediately activated.
Failure of magnetic pick-up sensor for
speed measurement.
The period for servicing is set by the
NextServTime setpoint. The
protection comes active if the running
hours of the engine reach this value.
Failure of alternator for charging the
battery.
The protection is active if the output
Sprinkler is closed.
Warning alarm in case of lost
connection to IGL-RA15 module.
ECU alarm list is not empty
RTC backup battery is flat
13.2 History file
InteliDrive Lite stores a record of each important event into the history file. The history file seats 255
records. When the history file is full, the oldest records are removed.
HINT
To force history download in LiteEdit (direct, modem or internet) open History window and select
History | Read history command.
13.2.1 Record structure
Number of historical event
Date of historical event in format DD/MM/YY
Time of historical event in format HH:MM:SS
Engine speed detected on BI3
InteliDrive Lite Analog input 1 value ( default Oil pressure)
InteliDrive Lite Analog input 2 value ( default Water temperature)
InteliDrive Lite Analog input 3 value ( default Fuel level)
InteliDrive Lite Analog input 4 value
InteliDrive Lite Analog input 5 value
InteliDrive Lite Analog input 6 value
InteliDrive Lite Analog input 7 value
InteliDrive Lite Analog input 8 value
InteliDrive Lite Analog input 9 value
Plug-in Analog input 1 value
Plug-in Analog input 2 value
Plug-in Analog input 3 value
Plug-in Analog input 4 value
Binary inputs InteliDrive Lite
Binary inputs InteliDrive Lite
To Next Page
Loading...
Need help?
General
