ComAp InteliDrive Lite Reference Guide

InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
144
12VDC
80 mA
+75 mA
+210 mA
+325 mA
24VDC
51 mA
+31 mA
+100 mA
+175 mA
14.4 Dimensions and weight
Dimensions 180x120x55mm
Weight 450g
14.5 Binary inputs and outputs
14.5.1 Binary inputs
Number of inputs 7
Input resistance 4,2kOhm
Input range 0-36VDC
Switching voltage level for close contact indication 0-2V
Max voltage level for open contact indication 8-36V
14.5.2 Binary open collector outputs
Number of outputs 7
Maximum current 0,5A
Maximum switching voltage 36VDC
14.6 Analog inputs
Not electrically separated
Number of inputs 9 (3 resistive and 6 voltage)
Resolution 10 bits
Wiring selectable range V, Ohm, mA
Maximal resistance range 2400Ohm
Maximal voltage range 10V
Current range 0-20mA
Input impedance 180Ohm for mA measuring
Input impedance > 100 kOhm for V measuring
Resistance measurement tolerance ±2% ±2Ohm out of measured value
14.7 Speed pick-up input
Type of sensor magnetic pick-up (connection by shielded able
is recommended)
Minimum input voltage 2V
pk
-
pk
(from 4Hz to 4kHz)
Maximum input voltage 50V
eff
Minimum measured frequency 4Hz
Maximum measured frequency 10 kHz (min. input voltage 6V
pk-pk
)
Frequency measurement tolerance 0,2%

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English