ComAp InteliLite 4 AMF 20 User Manual

InteliLite4 AMF20 Global Guide
473
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1441
Description
This LBO is used to activate corresponding stage of external load bank.
Dummy Load Stage 3
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1442
Description
This LBO is used to activate corresponding stage of external load bank.
Dummy Load Stage 4
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1443
Description
This LBO is used to activate corresponding stage of external load bank.
Dummy Load Stage 5
6 back to Logical binary outputs alphabetically
LBO: E
Related FW 1.3.0 Related applications AMF,MRS
Comm object 347
Description
This output is active when an ECU is configured, connected and the communication with the ECU is
established.
Note: When ECU POWER RELAY (PAGE 474) is not configured, output is evaluated all the time. If ECU
POWER RELAY (PAGE 474) is configured, output is evaluated only when engine is not stop (ECU
POWER RELAY (PAGE 474) is active).
ECU Comm OK
6 back to Logical binary outputs alphabetically

ComAp InteliLite 4 AMF 20 Specifications

General

Brand	ComAp
Model	InteliLite 4 AMF 20
Category	Controller
Language	English