InteliLite4 AMF20 Global Guide
62
5.2 Controller configuration and PC tools
connection
5.2.1 USB 62
5.2.2 RS232/RS485 63
5.2.3 Ethernet 64
6 back to Controller setup
This chapter contains brief introduction into the specifics of firmware and archive upload, as well as the
connection of various PC tools to the controller. If you require detailed information on each PC tool please use
the included Help in those PC tools or download their Global Guides.
5.2.1 USB
You may connect to the controller using the USB port. In this case standard USB A to B cable should be used.
Connection using InteliConfig
Image 5.1 First screen of InteliConfig – select connect to controller
Image 5.2 Second screen of InteliConfig – select detected controllers
To Next Page
Loading...
Need help?
General
