Programming Manual 50
Data Field Description
DDSfreq This field provides the DDS frequency
long This variable is the longitude of the spot beam centroid
lat This field provides the latitude of the spot beam centroid
symbol This data field indicates the symbol rate used for that particular spot beam
satlong This field provides the longitude of the L-band satellite
An example of this response follows:
$>JLBEAMEX,0
$> Table:0
$> Beam:0,1753247034,-88,45,1200,-101
$> Beam:1,1750643210,-98,45,1200,-101
$> Beam:2,1747278819,-108,45,1200,-101
$> Beam:3,1724619511,25,50,1200,16
$> Beam:4,1728989976,-75,0,1200,-98
$> Beam:5,1728989976,-165,13,1200,-98
$> Beam:6,1729006753,20,6,1200,25
$> Beam:7,1755131675,135,-30,1200,160
$> Beam:8,1728989976,90,15,1200,109
$> Beam:9,1728989976,179,15,1200,109
$> Table:1
6.3 $JOMS
This command requests the raw OmniSTAR subscription information and
has the following form:
$JOMS
The receiver will respond with the following message:
$>JOMS,Opt,Source,Type,AccrReduction,StartDate,EndDate,HourGlass,Exte
ntionTime,LinkVector,SoftwareVersion
To Next Page
Loading...
Need help?
General
