DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
IPv6
Go to the IPv6 tab to change IPv6 address of the router and configure IPv6 addresses assignment
settings.
Figure 91. Configuring the local interface. The IPv4 tab. The IP section.
Parameter Description
IP
Addressing Mode
Select the needed value from the drop-down list.
Static: an IPv6 address and a prefix are specified manually.
Prefix delegation: the router requests a prefix to configure an
IPv6 address from a delegating router.
IP address
The IPv6 address of the router in the local subnet. By default, the
following value is specified: fd01::1. The field is available for
editing, if the Static value is selected from the Addressing Mode
drop-down list.
Prefix
The length of the prefix subnet. By default, the value 64 is
specified. The field is available for editing, if the Static value is
selected from the Addressing Mode drop-down list.
Page 111 of 221
To Next Page
Loading...
Need help?
General
