DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
Figure 161. The System / Log page.
To enable logging of the system events, move the Logging switch to the right. Then specify the
needed parameters.
Parameter Description
Logging type
Select a type of logging from the drop-down list.
• Local: the system log is stored in the router's memory. When
this value is selected, the Server and Port fields are not
displayed.
• Remote: the system log is sent to the remote host specified in
the Server field.
• Local and remote: the system log is stored in the router's
memory and sent to the remote host specified in the Server
field.
Logging level
Select a type of messages and alerts/notifications to be logged.
Page 206 of 221
To Next Page
Loading...
Need help?
General
