DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
UDPXY
On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY
application. The UDPXY application transforms UDP traffic into HTTP traffic. This application
allows devices which cannot receive UDP streams to access stream video.
Figure 144. The Advanced / UDPXY page.
To enable the application, move the Enable switch to the right. When the application is enabled,
the IGMP Proxy function is automatically disabled.
Upon that the following fields are displayed on the page:
Parameter Description
Port The port of the router which the UDPXY application uses.
Buffer size for incoming
data
Size of intermediate buffer for received data.
By default, the minimum acceptable value is specified.
Buffer size for data
transferred to client
Size of intermediate buffer for transmitted data.
By default, the minimum acceptable value is specified.
Maximum client number
Maximum number of devices from the router's LAN which will be
served by the application.
After specifying the needed parameters, click the APPLY button.
Page 178 of 221
To Next Page
Loading...
Need help?
General
