DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Signal level
The signal level at the input of the modem's receiver. The zero
signal level shows that you are out of the coverage area of the
selected operator's network.
Operator name
When the needed network is available, the name of the operator is
displayed in this field.
Mode
A type of the network to which the USB modem is connected.
PIN
On the USB modem / PIN page, you can change the PIN code of the SIM card inserted into your
USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are unavailable for some models of LTE USB
modems.
The current state of the SIM card inserted into your USB modem is displayed in the Status field. If
the PIN code is entered incorrectly or the PIN code is not entered when the PIN code check is
enabled, the Device is locked value is displayed in the Status field. If the PIN code is entered
correctly or the PIN check is disabled, the Device is unlocked value is displayed in the Status
field.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the Yes
value is displayed in the PIN code request field. If the PIN check is disabled, the No value is
displayed in the PIN code request field.
Figure 125. The USB modem / PIN page.
To disable the PIN code check, in the PIN Code Request section, enter the current PIN code in
the PIN code field and click the DISABLE button (the button is displayed if the PIN code check is
enabled).
Page 157 of 221
To Next Page
Loading...
Need help?
General
