DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Con$guring Wireless Network
This configuration step is available for the 3G/LTE modem, Router, Access point, WISP
Repeater, and Repeater modes.
1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own
name for the wireless network or leave the value suggested by the router.
2. In the Password field, specify your own password for access to the wireless network or
leave the value suggested by the router (WPS PIN of the device, see the barcode label).
3. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the RESTORE button.
Figure 42. The page for configuring the wireless network.
4. If you want to create an additional wireless network isolated from your LAN, select the
Enable guest network checkbox (available for the 3G/LTE modem, Router, and
WISP Repeater modes only).
Figure 43. The page for configuring the wireless network.
5. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the router.
Page 59 of 221
To Next Page
Loading...
Need help?
General
