D-Link DSL-124 User Manual

131D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Section 5 - Connecting To Your Wireless Network
WPS Button
Connect a Wireless Client to your Router
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process).
Step 1 - Press the WPS button on the back of DSL-124 for about 1 second. The Internet LED on the front will start to blink.
Step 3 - Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless connection will be
secure with WPA2.
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as
wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that
you can press to connect to the DSL-124 router. Please refer to your user manual for the wireless device you want to connect to make sure you
understand how to enable WPS. Once you know, follow the steps below:

D-Link DSL-124 Specifications

General

Brand	D-Link
Model	DSL-124
Category	Network Router
Language	English