D-Link DSL-124 User Manual

61D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Wireless Access Control
The Wireless Access Control setup section enables you to configure MAC Address filters to
control which wireless clients can or cannot connect to your network.
Wireless Access
Control Mode:
Select Allow Listed, Deny Listed, or Disable.
WIRELESS ACCESS CONTROL MODE
MAC Address: Enter the MAC address of the device you wish to add to the current
access control list.
WIRELESS ACCESS CONTROL SETTINGS
CURRENT ACCESS CONTROL LIST
This list currently displays the MAC addresses of the devices being ltered. To remove a
device from the list, select the radio button next to the MAC address and click the Delete
Selected button. To remove all the entries from the list, click Delete All.
Click Apply Changes when you are done.
Click Add to add a device to the access control list or click Reset to clear the MAC address.

D-Link DSL-124 Specifications

General

Brand	D-Link
Model	DSL-124
Category	Network Router
Language	English