D-Link ShareCenter Pulse DNS-320 User Manual

36D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
Scan Disk
9
can disk provides a method to test the disk’s le system in your ShareCenter Pulse.
:
can Disk:
9
can Disk will scan your disks le system for errors
and/or corruption. After completion, the test results
will show Success or Failure. Click on the Scan Disk
button to start the test. If the test fails you can try
reformatting the drive and test again. Otherwise
you will need 3rd party disk troubleshooting tools.

olume:

se the drop-down menu to select the disk volume
that you want to run the Scan Disk test on.
:
can Disk Progress
Window:
;
f you have started a Scan Disk test then a window
with a progress bar will appear to monitor the test.
Click the Exit button to abort the test if required or
once the test has run 100 percent.

D-Link ShareCenter Pulse DNS-320 Specifications

Power

power supply	External Power Supply
power consumption (normal mode)	15.7 W
power consumption (sleep mode)	8.2 W

Operating Environment

operating temperature	0˚ to 40˚ C (32˚ to 104˚ F)
storage temperature	-20˚ to 70˚ C (-4˚ to 158˚ F)
operating humidity	5% to 90% (Non-condensing)

Ports & Interfaces

ethernet port	10/100/1000 Gigabit Ethernet Port
usb port	1 USB 2.0 Port
supported hard drive type	3.5” Internal SATA (Maximum HDD Capacity: 2 TB for each drive)

Weight and Dimensions

dimensions	146.4 x 115 x 178.5 mm (5.8 x 4.5 x 7.0 inches)
weight	0.85 kg (1.87 lbs)