D-Link ShareCenter Pulse DNS-320 User Manual

47D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
e
he Network Shares page allows the user to congure shared folders and rights to specic users and groups. To be able to create new network
access rules, the default rule must rst be removed by simply selecting it and clicking on the Delete button. You can also mount .iso les in the ISO
Mount Shares Setting. If a user has access to a mounted .iso le then that user will be able to read all the les within it.
Network Shares
e
he Network Shares Settings window allows you to add,
modify and remove both new and existing Network
Share and ISO Mount Share Settings.
To add a rule click on the New button. To modify an
existing rule click on the Modify button. To remove a
rule click on the Delete button.
To select a rule, simply click on the rule and the entry
should change to red.
At the bottom of the table the user can navigate through
pages and also refresh the window by click on the
Refresh button.
If at any point the user wants to reset the network access
list to the default conguration, click on the Reset
Network Shares button.
fgh
work Shares: /
ISO Mount Shares:

D-Link ShareCenter Pulse DNS-320 Specifications

Power

power supply	External Power Supply
power consumption (normal mode)	15.7 W
power consumption (sleep mode)	8.2 W

Operating Environment

operating temperature	0˚ to 40˚ C (32˚ to 104˚ F)
storage temperature	-20˚ to 70˚ C (-4˚ to 158˚ F)
operating humidity	5% to 90% (Non-condensing)

Ports & Interfaces

ethernet port	10/100/1000 Gigabit Ethernet Port
usb port	1 USB 2.0 Port
supported hard drive type	3.5” Internal SATA (Maximum HDD Capacity: 2 TB for each drive)

Weight and Dimensions

dimensions	146.4 x 115 x 178.5 mm (5.8 x 4.5 x 7.0 inches)
weight	0.85 kg (1.87 lbs)