D-Link ShareCenter Pulse DNS-320 User Manual

69D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration

orkgroup:
D
nter your Workgroup name here. The workgroup
name should be the same as the computers on the
network. Devices using the same workgroup will have
additional le sharing methods available.
EFGHI
D
J
ter your device name here. This name is what the
device will appear as on the network. By default, the
device name is dlink-xxxxxx, where xxxxxx is the last
six digits of the MAC address.
K
H
LMNOPQORS
I

ssign a device description to the device.
Click Save Settings to accept these changes.
Device
T he device settings page allows you to assign a workgroup, name and description to the device. You can access this device by typing the host name
in the URL section of your web browser. For example: http://dlink-d10001.

D-Link ShareCenter Pulse DNS-320 Specifications

Power

power supply	External Power Supply
power consumption (normal mode)	15.7 W
power consumption (sleep mode)	8.2 W

Operating Environment

operating temperature	0˚ to 40˚ C (32˚ to 104˚ F)
storage temperature	-20˚ to 70˚ C (-4˚ to 158˚ F)
operating humidity	5% to 90% (Non-condensing)

Ports & Interfaces

ethernet port	10/100/1000 Gigabit Ethernet Port
usb port	1 USB 2.0 Port
supported hard drive type	3.5” Internal SATA (Maximum HDD Capacity: 2 TB for each drive)

Weight and Dimensions

dimensions	146.4 x 115 x 178.5 mm (5.8 x 4.5 x 7.0 inches)
weight	0.85 kg (1.87 lbs)