D-Link ShareCenter Pulse DNS-320 User Manual

84D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
Remote Backups
ý emote Backups allows you to back up your device to another ShareCenter Pulse or Linux Server or vice versa from a remote ShareCenter Pulse
or Linux Server to your device. Click the Create button in the remote backups list to start a wizard where you can congure the Remote Backup
functionality.
þÿ  
emote backup
service:

this box to enable the remote backup
server functionality to that a remote NAS or
Linux.
Note: If you are not using the Remote Backup
functionality leave this box unchecked so
that your device performance will not be
aected by the additional overhead used by
this process.

assword:

ter a password that the remote client will
use.

emote Backups list:

his is the list of remote backup jobs built by
pressing the Create button above the list to
congure each job.

reate:

lick the Create button to build a new
remote backup job.

odify:

lick to make changes to your existing
Remote Backup jobs in the Remote Backup
list. You must select the remote backup job
rst and then click the Modify button.

e:

o remove a Remote Backup job select the job
in the list and then click the Delete button.

D-Link ShareCenter Pulse DNS-320 Specifications

Power

power supply	External Power Supply
power consumption (normal mode)	15.7 W
power consumption (sleep mode)	8.2 W

Operating Environment

operating temperature	0˚ to 40˚ C (32˚ to 104˚ F)
storage temperature	-20˚ to 70˚ C (-4˚ to 158˚ F)
operating humidity	5% to 90% (Non-condensing)

Ports & Interfaces

ethernet port	10/100/1000 Gigabit Ethernet Port
usb port	1 USB 2.0 Port
supported hard drive type	3.5” Internal SATA (Maximum HDD Capacity: 2 TB for each drive)

Weight and Dimensions

dimensions	146.4 x 115 x 178.5 mm (5.8 x 4.5 x 7.0 inches)
weight	0.85 kg (1.87 lbs)