Dahua IPC-HFW2431T-ZS-S2 User Manual

Step 4 Click Save.
5.7 Setting Smart Plan
Smart plan includes face detection, heat map, IVS, people counting, face detection, video metadata,
stereo analysis and schedule. The intelligent function can be enabled only after the corresponding
smart plan is enabled.
5.7.1 Basic Smart Plan
Procedure
Step 1 Select Setting > Event > Smart Plan.
The Smart Plan page is displayed. For smart plan icon, see the table below.
Table 5-5 Description of smart plan icon
Icon Description Icon Description Icon Description
Face detection Stereo vision Heat map
Stereo analysis IVS
Face
recognition
People
counting
Video
metadata
Crowd map
ANPR
Vehicle
density
— —
Step 2 Enable smart functions as need.
Dierent cameras support dierent ways to enable smart functions. Select corresponding
ways to enable these functions according to the actual page.
●
Select an icon to enable the corresponding smart plan.
Click an icon to enable it, and the selected smart function is highlighted. Click it again
to cancel the selection.
If the icon
on the page, click it to enable the smart function switch.
●
Enable smart plan through Add Plan.
1. Select a preset point from the Add Plan the page.
The smart plan for the point is displayed.
Operation Manual
158

Dahua IPC-HFW2431T-ZS-S2 Specifications

General

Brand	Dahua
Model	IPC-HFW2431T-ZS-S2
Category	Security Camera
Language	English