Dahua IPC-HFW2431T-ZS-S2 User Manual

Figure 5-67 Calibration conguration (stereo analysis)
Step 2 Click Clear to clear the default calibration box.
Step 3 Click Ground to draw a rectangular box in the image.
Ground should be on the same plane and as big as possible for calibration.
Step 4 Click Save, and then the camera calculates its height above the ground and the angle it
forms with the ground.
If the height and angle are quite dierent from the actual situation, repeat Step 2 and
Step 3 .
5.12.3 Queuing
The system counts the queue people in the detection area. When the queue people number
exceeds the congured number or the queue time exceeds the congured time, the alarm is
triggered, and the system performs an alarm linkage.
Prerequisites
Select Setting > Event > Smart Plan, and then enable People Counting.
Procedure
Step 1 Select Setting > Event > Queuing.
Operation Manual
193

Dahua IPC-HFW2431T-ZS-S2 Specifications

General

Brand	Dahua
Model	IPC-HFW2431T-ZS-S2
Category	Security Camera
Language	English