3.1.2 Steel Grid Brake Resistors
The steel grid brake resistors are designed for horizontal
mounting only.
NOTICE
All resistors are cooled by natural convection. To ensure
sufficient airflow and cooling, follow minimum
clearances in Illustration 3.10 and Table 3.3.
Illustration 3.10 Minimum Clearances of all Steel Grid Brake
Resistors - Top View
500 mm
175Uxxxx
130BD884.10
Illustration 3.11 Minimum Clearances of all Steel Grid Brake
Resistors - Side View
Illustration 3.12 Orientation of Steel Grid Brake Resistors
Installation Design Guide
10 Danfoss A/S © Rev. 05/2014 All rights reserved. MG90O202
33
To Next Page
Loading...
Need help?
General
