Danfoss vlt FC 102 Programming Guide

16-63 Terminal 54 Switch Setting
View the setting of input terminal 54.
Option: Function:
[0] * Current
[1] Voltage
16-64 Analog Input 54
Range: Function:
0* [-20 - 20 ] View the actual value at input 54.
16-65 Analog Output 42 [mA]
Range: Function:
0* [0 - 30 ] View the actual value at output 42
in mA. The value shown reects the
selection in parameter 6-50 Terminal
42 Output.
16-66 Digital Output [bin]
Range: Function:
0* [0 - 15 ] View the binary value of all digital
outputs.
16-67 Pulse Input #29 [Hz]
Range: Function:
0* [0 - 130000 ] View the actual frequency rate on
terminal 29.
16-68 Pulse Input #33 [Hz]
Range: Function:
0* [0 - 130000 ] View the actual value of the
frequency applied at terminal 33 as
an impulse input.
16-69 Pulse Output #27 [Hz]
Range: Function:
0* [0 - 40000 ] View the actual value of impulses
applied to terminal 27 in digital
output mode.
16-70 Pulse Output #29 [Hz]
Range: Function:
0* [0 - 40000 ] View the actual value of pulses to
terminal 29 in digital output mode.
16-71 Relay Output [bin]
Range: Function:
0* [0 - 511 ] View the settings of all relays.
16-71 Relay Output [bin]
Range: Function:
Illustration 3.52 Relay Settings
16-72 Counter A
Range: Function:
0* [-2147483648
-
2147483647 ]
View the present value of counter
A. Counters are useful as
comparator operands, see
parameter 13-10 Comparator
Operand.
Reset or change the value either via
digital inputs (parameter group 5-1*
Digital Inputs) or by using an SLC
action (parameter 13-52 SL Controller
Action).
16-73 Counter B
Range: Function:
0* [-2147483648
-
2147483647 ]
View the present value of counter
B. Counters are useful as
comparator operands,
parameter 13-10 Comparator
Operand.
Reset or change the value either via
digital inputs (parameter group 5-1*
Digital Inputs) or by using an SLC
action (parameter 13-52 SL Controller
Action).
16-75 Analog In X30/11
Range: Function:
0* [-20 - 20 ] View the actual value at input
X30/11 of VLT
®
General Purpose I/O
MCB 101.
16-76 Analog In X30/12
Range: Function:
0* [-20 - 20 ] View the actual value at input
X30/12 of VLT
®
General Purpose I/O
MCB 101.
Parameter Descriptions
VLT
®
HVAC Drive FC 102
168 Danfoss A/S © 10/2019 All rights reserved. M0010001
33

Danfoss vlt FC 102 Specifications

General

Brand	Danfoss
Model	vlt FC 102
Category	DC Drives
Language	English