Datalogic PowerScan 7000 2D Product Reference Guide

Product Reference Guide 9-1
Chapter 9
Utilities
To Add a Test Code I.D. Prefix to All
Symbologies
This selection allows you to turn on transmission of a Code I.D. before
the decoded symbology. (See the
Symbology Chart on page A-1) for the
single character code that identifies each symbology.) This action first
clears all current prefixes, then programs a Code I.D. prefix for all sym-
bologies. This is a temporary setting that will be removed when the unit
is power cycled.
Show Software Revision
Scan the bar code below to output the current software revision, unit
serial number, and other product information.
Show Data Format
Scan the bar code below to show current data format settings.
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Revision
Data Format Settings

Datalogic PowerScan 7000 2D Specifications

General

Brand	Datalogic
Model	PowerScan 7000 2D
Category	Barcode Reader
Language	English