Datalogic PowerScan 7000 2D Product Reference Guide

Data Format Editor Introduction
Product Reference Guide 5-5
ED Check to make sure there is a non-numeric ASCII character at the current
cursor position. If character is numeric, format is aborted. Syntax = ED.
Data Format Editor
Data Formatter
When Data Formatter is turned off, the bar code data is output to the
host as read (including prefixes and suffixes). Choose one of the follow-
ing options. Default = Data Formatter On, but Not Required.
When Data Formatter is required, all input data must conform to an
edited format or the imager does not transmit the input data to the host
device.
Enter Data Format
* Default Data Format
Clear One Data Format
Save
Discard
Clear All Data Formats
Data Formatter Off
* Data Formatter On,
but Not Required
Data Format On, Format Required

Datalogic PowerScan 7000 2D Specifications

General

Brand	Datalogic
Model	PowerScan 7000 2D
Category	Barcode Reader
Language	English