To Next Page

To Previous Page

Data Editing

4-4 PowerScan

7000 2D

Example: Add a Suffix to a specific symbology

To send a CR (carriage return)Suffix for UPC only:

Step 1. Scan Add Suffix.

Step 2. Determine the 2 digit hex value from the Symbology Chart (included

in ASCII Conversion Chart (Code Page 1252) on page A-4) for UPC.

Step 3. Scan 6, 3 from the Programming Chart on page B-5 of this manual.

Step 4. Determine the hex value from the ASCII Conversion Chart (Code

Page 1252) on page A-4, for the CR (carriage return).

Step 5. Scan 0, D from the Programming Chart on page B-5 of this manual.

Step 6. Scan Save, or scan Discard to exit without saving.

To Clear One or All Prefixes or Suffixes:

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a

symbology. When you Clear One Prefix (Suffix), the specific character

you select is deleted from the symbology you want. When you Clear All

Prefixes (Suffixes), all the prefixes or suffixes for a symbology are deleted.

Step 1. Scan the Clear One Prefix or Clear One Suffix symbol.

Step 2. Determine the 2 digit Hex value from the Symbology Chart (included

in ASCII Conversion Chart (Code Page 1252) on page A-4) for the

symbology from which you want to clear the prefix or suffix.

Step 3. Scan the 2 digit hex value from the Programming Chart on page B-5

of this manual or scan 9, 9 for all symbologies.

Your change is automatically saved.

To Add a Carriage Return Suffix to all Sym-

bologies

Scan the following bar code if you wish to add a carriage return suffix to

all symbologies at once. This action first clears all current suffixes, then

programs a carriage return suffix for all symbologies.

Add CR Suffix

All Symbologies

Datalogic PowerScan 7000 2D Product Reference Guide

Other manuals for Datalogic PowerScan 7000 2D