To Next Page

To Previous Page

Utilities

9-2 PowerScan

7000 2D

Resetting the Standard Product

Defaults

If you aren’t sure what programming options are in your imager, or

you’ve changed some options and want the standard product default set-

tings restored, scan the Standard Product Default Settings bar code below.

Menu Commands on page 10-6 lists the standard product default settings

for each of the commands (indicated by an asterisk (*) on the program-

ming pages).

Test Menu

When you scan the Test Menu On code, then scan a programming code

in this manual, the imager displays the content of a programming code.

The programming function will still occur, but in addition, the content

of that programming code is output to the terminal.

2D PQA (Print Quality Assessment)

Two-dimensional Print Quality Assessment (2D PQA) is a feature of the

imager where the data from the successful read of a 2D bar code symbol

is augmented with lines of text that both identify the symbol, and also

report graded measurement parameters obtained from it.

NOTE

This feature should not be used during normal

imager operation.

Standard Product Default Settings

* Off

Datalogic PowerScan 7000 2D Product Reference Guide

Other manuals for Datalogic PowerScan 7000 2D