Dell P130G Service Manual

Storage
Table 6. Storage options
Option Description
SATA/NVMe Operation
Allows you to set the operating mode of the integrated storage
device controller.
The options are:
● Disabled
● AHCI/NVMe
● RAID On—By default, the RAID On option is enabled.
Storage Interface
Allows you to enable or disable various drives on board.
The options are:
● M.2 PCIe SSD-0
● M.2 PCIe SSD-1
By default, all the options are enabled.
SMART Reporting
This field controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of
the Self Monitoring Analysis and Reporting Technology (SMART)
specification. By default, the Enable SMART Reporting option is
disabled .
Drive Information
Provides information about drive type and device.
Display
Table 7. Display options
Option Description
Display Brightness
Allows you to set the screen brightness when running on battery
and AC power.
The options are:
● Brightness on battery power - By default, set to 50.
● Brightness on AC power - By default, set to 100.
EcoPower
EcoPower increases the battery life by reducing the display
brightness when appropriate.
By default Enable EcoPower is enabled.
Full Screen Logo
Displays full screen logo when the image matches screen
resolution.
By default, all the option is disabled.
Connection options
Table 8. Connection
Option Description
Integrated NIC
Integrated NIC controls the onboard LAN controller. It allows
pre-OS and early operating system networking features to
System setup 101

Dell P130G Specifications

General

Model	Dell P130G
Category	Laptop
RAM	8GB DDR4
Storage	256GB SSD
Display	13.3-inch FHD (1920 x 1080)
Operating System	Windows 10
Battery	3-Cell 42Whr Battery