Removing the 4-cell battery - UMA/discrete
Prerequisites
NOTE:
The battery type in your computer varies depending on the configuration ordered.
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
About this task
The figure indicates the location of the battery in a discrete configuration and provides a visual representation of the removal
procedure.
Steps
1. Disconnect the battery cable from the system board.
2. Remove the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
3. Lift the battery off the palm-rest and keyboard assembly.
Installing the 4-cell battery - UMA/discrete
Prerequisites
NOTE:
The battery type in your computer varies depending on the configuration ordered.
If you are replacing a component, remove the existing component before performing the installation procedure.
Disassembly and reassembly
21