About this task
The following image indicates the location of the I/O board and provides a visual representation of the installation procedure.
Steps
1 Align and place the I/O board on the palm-rest and keyboard assembly.
2 Install the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
3 Connect the I/O-board cable to the I/O board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Identifier GUID-E641BD48-9062-46FE-8F5A-723887A0921D
Status Released
Display assembly
42
Removing and installing components
To Next Page
Loading...
Need help?
General
