Delta AS218TX-A User Manual

8.2.4 System Settings – Input Point Filter Time
On the Input Point Filter Time page, you can set the input point filter time for each input. If the duration of the received
signal time is less than the filter time setting value, it is processed as noise and filtered out. Select an appropriate
filter time according to your needs.
 X Input Point Filter for CPU module

Default Setting
: uses the default values in the input point filter.

Manual Setting
: uses the values you enter for the filter time for each X input point.
 X0.0–X0.15 Input Point Filter Time
If you select Manual Setting for the previous parameter, you can set the filter time individually for X0.0–X0.15.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Delta AS218TX-A Specifications

General

Brand	Delta
Model	AS218TX-A
Category	Control Unit
Language	English