9.3.3 PROFINET Specification
When AS-FPFN02 is installed on AS300 PLC CPU, this communication card can work independently and does NOT
occupy the communication port of PLC CPU. AS-FPFN02 can act as a PROFINET adapter and connect to a PROFINET
scanner to exchange data on the PROFINET Network (PN) Refer to section 10.2.8 of AS Module Manual for more
information.
Item Specification
Communication Protocol PROFINET
EtherNet/IP Interface
100 Mbit with 2 x RJ45
Device Type PROFINET Devices
Network Cable Length 100 meter
Error Indicator
System Fail (SF): Red; Bus Fail (BF): Red
Max. IO Slot Supported 17
Register to Read and Write AS300 series data registers are supported to read and write
Minimum Time for Data Exchange to Operate
10 ms
Maximum Data Length/Per Transmission
Input: 250 words
Output: 250 words
PROFINET Configuration Download PROFINET Configurations from PN Controller
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
