Delta AS218TX-A User Manual

Notes
 Enable BOOTP: when the IP address receiving mode is BOOTP (BOOTP is enabled), the IP address is
assigned, and the device sends out BOOTP requests for IP addresses during each power-on.
 Enable DHCP: when the IP address receiving mode is DHCP (DHCP is enabled), the IP address is assigned,
and the device sends out DHCP requests for IP addresses during each power-on.
 Disable DHCP/BOOTP: when BOOTP is disabled, the device does not send out any DHCP/BOOTP requests
for IP addresses during each power-on.
9.4.3 Network
HWCONFIG provides a graphical user interface, and you can see the devices and their EtherNet/IP connections in the
Network View.
EtherNet/IP Page
Item Definition

Toolbar Toolbar buttons

Network View Displays the connected devices and their connection status

Configuration Area Displays the configurations and allows you to set the parameters

Product List Displays the available devices that can be connected to EtherNet/IP
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Delta AS218TX-A Specifications

General

Brand	Delta
Model	AS218TX-A
Category	Control Unit
Language	English