Chapter 3 UnpackingC2000
3-2
The AC motor drive should be kept in the shipping carton or crate before installation. In order to retain the
warranty coverage, the AC motor drive should be stored properly when it is not to be used for an extended
period of time.
3-1 Unpacking
Follow these steps to unpack the AC motor drive:
Frame D (carton version)
Unpacking 1 (VFDXXXCXXA, VFDXXXC63B-00) Unpacking 2 (VFDXXXCXXE, VFDXXXC63B-21)
Cut the three pieces of packaging strap off.
Cut the three pieces of packaging strap off.
Remove the top cover, take out the EPEs and the
manual, and then loosen the four screws.
Remove the top cover, take out the EPEs, rubber
and the manual, and then loosen the six screws.
Figure 3-1
Figure 3-2
Figure 3-5
Figure 3-4
To Next Page
Loading...
Need help?
General