Issue Description of Changes Date
C430 to C438. Added new error codes C41C,
C421 to C426, C451 to C453, and C461 to C465
12. Section 6.3: added error code 0E1C for device
D1067.
13. Appendix A: added section A.4 Notes on
Utilizing USB communication.
14. Appendix B: updated the descriptions for
CR#26, and CR#88 to CR#93 in sections from
B.2.2 to B.2.4.
15. Appendix C: updated the relay timer
specification, counter C251 specification and
serial ports specification in section C.1.
Updated D1000 and D1022 in section C.2.
Added C.2.1 PLC CPU Built-in Inputs and
Outputs. Added C.5 Definitions of TP04P
Communication Ports.
16. Appendix D: updated the contents in D.1.1 to
D.1.4.
12
th
1. Section 2.8: updated M1084, M1356,
M1360-M1439, M1582, and M1700-M1731. Added
M1283.
2. Section 2.13: updated D1123, D1168,
D1355-D1370, and D1415-D1991. Added D1248,
D1254, D1385.
3. Section 2.16: updat
ed Delta communication
cable, PLC LINK description and added a new
function group, Check the input/output points of
the digital extension module or number of the
special modules when power-on.
4. Chapter 3: updated K33 and K36 in DTM
instruction (API68). Added descriptions as well
as examples for M1263 and updated D1123, and
D1168 in RS instruction (API80). Added new
communication mode (S2) in ETHRS instruction
(API 337). Updated the supporting firmware
version of DVP-SS2 in $MOV (API343).
2022/3/22
13
th
1. Added notes on the maximum frequency of
various input counters for
ES2, 12SA2, SX2, SS2, 12SE, 26SE, and 28SA2
in section 2.12.
2.
Categorized the same groups of the instructions
in the same sections in Chapter 3.
3. Updated the following instructions API113,
API156, API158, API315, API337, and
API344-API354 in Chapter 3.
4. Updated the general specification from slim type
2022/08/19
To Next Page
Loading...
Need help?
General
