78
Operating the PV inverter
CAUTION
Machine and equipment damage may occur.
► Please only adjust active and reactive power settings if you are a quali-
ed electrical technician with the knowledge to do so
► Adjustments may affect energy production
► Some values entered in the Active/Reactive Power settings must come
from the local grid operator. Please check with them before making any
adjustments
7.3.6.3.1 Power Limit
User can select set percentage of actual or rated power to limit inverter’s output power. Inverter
will start the action once the user sets the Mode to “ON”. This feature is available for LVD and
MVD grids.
Figure 7.17.: Power Limit settings page
To Next Page
Loading...
Need help?
General
