Icon
Details
Ink type allowed.
Ink type not allowed.
6.
To enable the setting, remove the ink cartridge from the print head and reinstall it.
End of procedure.
INK CARTRIDGE INSTALLATION
WARNING Hazardous Chemicals. Risk of eye and skin damage.
Wear protective equipment such as gloves and glasses when near the
printer.
Contact with chemicals can cause skin or eye damage.
Refer to Safety Data Sheet.
CAUTION Fragile electrical contacts. Risk of damage to the ink cartridge and print
head.
Be careful when inserting the ink cartridge. Forcing the cartridge against
the electrical contacts can break the contacts on the print head circuit
board.
To install an ink cartridge:
1. If the print group is active, stop the print group. Select STOP, select the print group and
select Stop.
2. Remove the protective cover from the ink cartridge.
3. If the cartridge is new, clean the electrical contacts with an ethanol wipe, to remove
corrosion protection.
Note
Cleaning wipe part number: EPT039697
4.
Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.
Note
The 45° angle stops debris from one nozzle contaminating the next nozzle.
INSTALLATION
EPT053091 - Issue 5 - 07 May 2021 70
To Next Page
Loading...
Need help?
General
